Tel: +86-19073068826 Correo electrónico: sales@ztiradar.com

Acerca de Contacto |

This speed detection radar is developed to warn the drivers with its speed feedback. It is recommended to install this type of radar with LED display, traffic warning lights or ANPR camera by the roadside in expressway, ordinary highway, community entrance road, corner intersection and school road section etc. so as to effectively reduce traffic accidents. ZT-TSRK200SF is a 24GHz speed radar, which can detect up to 200m and show vehicle speed from both directions.

Aplicaciones del producto:

24GHz ISM Band internationally accepted by traffic management

Accurate speed measurement and difference within 1km/h

Instalación flexible como pórtico y al borde de la carretera por encima del tráfico

Support multiple lanes coverage for LED speed sign display

Resistencia a todas las inclemencias del tiempo, No se ve afectado por la luz, polvo, lluvia, nieve, haze and harsh environment

  1. There is an error in the speed value.

Due to the fact that the speedometer on vehicle has a positive error while the radar speed detection has a negative error, it is normal for the speed to be lower. If the error is far way from true, it could be the big deviation angle. Check if the installation angle is too big. Please modify theangular velocity supplementparameter of the radar to increase the compensation angle

to the appropriate value.

  1. When vehicles pass by, there is no speed output.

2.1 Adjust the radar angle to ensure that the radar is facing the direction of incoming vehicles

2.2. Adjust the lower limit value of the speed. If the lower limit value is too high, low-speed vehicles will not be detected;

  1. When no vehicles pass by, there is still a speed displayed.

3.1. Check if there are any electromagnetic interference sources nearby

3.2. Adjust theinterference coefficientof the radar to filter out small moving targets

  1. The device is not working.

4.1 Check if the device connection wires and power supply are correct.

  1. Detailed radar parameter settings

Equipment generally does not require parameter settings. If special settings are needed, it can be modified through the radar upper computer software. For detailed operation methods, please contact us.

 

Contesta

Deja un mensaje