This speed detection radar is developed to warn the drivers with its speed feedback. It is recommended to install this type of radar with LED display, traffic warning lights or ANPR camera by the roadside in expressway, ordinary highway, community entrance road, corner intersection and school road section etc. so as to effectively reduce traffic accidents. ZT-TSRK200SF is a 24GHz speed radar, which can detect up to 200m and show vehicle speed from both directions.
Product Applications:
24GHz ISM Band internationally accepted by traffic management
Accurate speed measurement and difference within 1km/h
Flexible installation like gantry and roadside above the traffic
Support multiple lanes coverage for LED speed sign display
All weather resistance, not affected by light, dust, rain, snow, haze and harsh environment
There is an error in the speed value.
Due to the fact that the speedometer on vehicle has a positive error while the radar speed detection has a negative error, it is normal for the speed to be lower. If the error is far way from true, it could be the big deviation angle. Check if the installation angle is too big. Please modify the “angular velocity supplement” parameter of the radar to increase the compensation angle
to the appropriate value.
When vehicles pass by, there is no speed output.
2.1 Adjust the radar angle to ensure that the radar is facing the direction of incoming vehicles
2.2. Adjust the lower limit value of the speed. If the lower limit value is too high, low-speed vehicles will not be detected;
When no vehicles pass by, there is still a speed displayed.
3.1. Check if there are any electromagnetic interference sources nearby
3.2. Adjust the “interference coefficient” of the radar to filter out small moving targets
The device is not working.
4.1 Check if the device connection wires and power supply are correct.
Detailed radar parameter settings
Equipment generally does not require parameter settings. If special settings are needed, it can be modified through the radar upper computer software. For detailed operation methods, please contact us.